CATALOGUE

SERVO CONTROLLED AC VOLTAGE STABILISER

In laboratories and Industries where precision supply voltage is essential to avoid damage in costly equipments and instruments, use of servo controlled voltage stablizer are recommended. This type of voltage stablizer provides desired output voltage, either in single phase or three phase with a minimum of variation i.e. ±1% with an wide input range starting from 90V-265V in the lower side & 220V-290V on the higher side for single phase stabilizer & 160V-500V in the lower side and 380V-500V on the higher side for 3Phase variety as per customers specification.

A Servo Controlled Voltage Stabilizer essentially consists of a variable auto transformer (variac) coupled with a servo motor, a buck-boost transformer and an electronic controller. A sample output is taken and compared with a reference standard. The difference is called Error signal which is used to drive the servo motor for output voltage correction.

Stabilizers for balance load and supply systems can be used when variations in input supply voltage (phase to phase or phase to neutral) in all three phase are almost equal. In this Stabilizer a single 3 phase variac coupled with one drive motor is used for voltage correction. Output of any one phase of the three phase is selected and monitored to actuate the drive motor.

Stabilizers for unbalanced load and supply systems can be used where the three phase voltages vary in an unbalanced manner. These Stabilizers have three nos. single phase variacs individually coupled with drive motors. Each drive motor along with electronic controller is entrusted to take care of one phase to neutral voltage and load variation independently. In other words these stablizers are a combination of three nos. Single Phase Stabilizers connected in STAR configuration.

Fiji Electronics Pvt. Ltd. manufactures Servo Controlled AC Voltage Stabilizer of various capacities starting from 0.5 KVA to 20KVA in single phase and 3KVA to 1000 KVA in Three Phase.

TECHNICAL SPECIFICATION OF SERVO CONTROLLED VOLTAGE STABILISER

01	Input Voltage	Wide variation of input voltage range starting from90V-265V in the lower side & 220V-290V on the higher side for single phase stabilizer & 160V-500V in the lower side and 380V-500V on the higher side for 3Phase variety as per customers specification.
02	Output Voltage	The output Voltage can be set anywhere between 220V-240V in Single Phase and 380V-440V in Three Phase.
03	Output Variation	± 1 %
04	System	Balanced/Unbalanced ( Individual phase correction).
05	Control	Automatic / Manual.
06	Instrumentation	Voltmeter on each phase and Voltmeter and Ampmeter to indicate Output Line Voltage and Output Current with the help of selector switch.
07	Frequency	47 Hz to 53Hz ( Sinusoidal ).
08	Input Indication	High and low voltage indicators with Audible alarm.
09	Output Wave Form	The Out put wave form is true replica of the input.
10	Correction rate	25V/sec for each phase.
11	Ambient Temperature	0°c - 45°c.
12	Type of Cooling	Air Cooled & Oil Cooled
13	Type of Motor	AC step synchronous Motor
14	Protection	1) A Circuit Breaker is provided at the output for over load / short Circuit Protection.

Optional Features:

Spike & surge suppressor is provided at the output.
Over and under voltage trip facility and single phasing preventor with the help of a contactor system.
By pass facility from main to stabilizers and stabilizers to main is provided.

ISOLATION TRANSFORMER

Fiji Electronics Pvt. Ltd. Manufactures Isolation Transformer as per customer's requirement and specification

TECHNICAL SPECIFICATION OF ISOLATION TRANSFORMER

01	Rating	: From 0.5 KVA to 200 KVA
02	Mode of Operation	: 1 : 1 Isolation Transformer.
03	Material used	: Super enamelled copper wire & CRGO core
04	Common mode noise rejection Transients, Spike, Surges	: 100 Db
05	DC Galvanic Isolation (Winding to Winding or ground to winding)	: Over 500 Megohm.
06	Breakdown strength	: 2000V AC for 1 minute.
07	Acceptable line frequency	: 47 to 53Hz.
08	Load regulation	: Within 3 to 5%.
09	Temperature rise	: 20ºc above ambient temperature.
10	Efficiency	: 95%.
11	Load Test(load test & efficiency can be calculated by short circuit method)	: By short circuit method.

VOLTAGE STABILISER

We Also manufacture Wall mounting Automatic Voltage Stabilizers. These Stabilizers are Specially designed to use with AC machines.

Wide fluctuation of main supply voltages is harmful for T.V., Refrigerators, Vacuum Cleaner, Air Conditioner etc. Fiji Electronics Pvt. Ltd. have designed voltage stablizer which gives an output which normally varies between 200V – 240V±1% which is considered safe limits of such equipments and appliances.

There are two types of Voltage Stabilizers suitable for use with domestic appliances (1) Manual Voltage Stabilizers, (2) Automatic Voltage Stabilizer.

1.Manual Voltage Stabilizer consist of a Single Phase Auto Transformer with multiple taps. The taps are selected with the help of a Rotary Switch of appropriate rating to give the desired output with a wide variation of input voltage i.e. from 50V-280V.

2.An Automatic voltage stablizer also uses an auto transformer with several tappings and a control circuit. The solid state electronic controller senses the label of input supply and sends the required command signal to actuate electro magnetic relays to select a particular transformer tapping thus manufacturing the output voltage within the safe limit.

FIJI has got both the stablizers of various capacities for domestic use starting from a Minimum of 100VA to Maximum of 20KVA.

(Manual Auto Cut)

Model	Capacity	Input Range	Output Range
FE 222	200VA	90V – 300V	225V ± 9%
FE 205	200VA	50V – 300V	225V ± 9%
FE 508	500VA	80V – 300V	225V ± 9%
FE 505	500VA	50V – 300V	225V ± 9%
FE 1M	1KVA	80V – 300V	225V ± 9%
FE 2M	2KVA	80V – 300V	225V ± 9%
FE 3M	3KVA	80V – 300V	225V ± 9%
FE 4M	4KVA	80V – 300V	225V ± 9%
FE 5M	5KVA	80V – 300V	225V ± 9%
FE 7M	7KVA	80V – 300V	225V ± 9%
FE 1MS	1KVA	50V – 300V	225V ± 9%
FE 2MS	2KVA	50V – 300V	225V ± 9%
FE 3MS	3KVA	50V – 300V	225V ± 9%
FE 4MS	4KVA	50V – 300V	225V ± 9%
FE 5MS	5KVA	50V – 300V	225V ± 9%
FE 7MS	7KVA	50V – 300V	225V ± 9%
FE 10M	10KVA	80V – 300V	225V ± 9%
FE 5KVA (2 PHASE)	5KVA

( A U T O M A T I C )

FE 502N(Economy)	500VA	130V – 280V	200V - 240V ±1%
FE 501	500VA	160V – 275V	200V - 240V ±1%
FE 501V	500VA	160V – 275V	200V - 240V ±1%
FE 502	500VA	130V – 280V	200V - 240V ±1%

( A U T O M A T I C )

Model	Capacity	Input Range	Output Range
FE 502D	500VA	130V – 280V	200V - 240V ±1%
FE 502V	500VA	130V - 280V	200V - 240V ±1%
FE 555 (With Cut Out)	500VA	130V – 280V	200V - 240V ±1%
FE 504V	500VA	100V – 280V	200V - 240V ±1%
FE 550 (With Cut out)	500VA	50V – 265V	200V - 240V ±1%
FE 1001V	1KVA	175V – 275V	200V - 240V ±1%
FE 1003V	1KVA	130V – 280V	200V - 240V ±1%
FE 1004V	1KVA	100V – 280V	200V - 240V ±1%
FE 1006V(With Cut Out)	1KVA	50V – 265V	200V - 240V ±1%
FE 2003V	2KVA	130V – 280V	200V - 240V ±1%
FE 2004V	2KVA	100V – 280V	200V - 240V ±1%
FE 2006V(With Cut Out)	2KVA	50V – 265V	200V - 240V ±1%
FE 3001V	3KVA	175V – 275V	200V - 240V ±1%
FE 3002V	3KVA	160V – 275V	200V - 240V ±1%
FE 3003V	3KVA	130V – 280V	200V - 240V ±1%
FE 3004V	3KVA	100V – 280V	200V - 240V ±1%
FE 3006V(With Cut Out)	3KVA	50V – 265V	200V - 240V ±1%
FE 4002V	4KVA	160V – 275V	200V - 240V ±1%
FE 4003V	4KVA	130V – 280V	200V - 240V ±1%
FE 4004V	4KVA	100V – 280V	200V - 240V ±1%
FE 5001V	5KVA	175V – 275V	200V - 240V ±1%
FE 5002V (LINE LOAD)	5KVA	130V – 280V	200V - 240V ±1%
FE 5003V	5KVA	160V – 270V	200V - 240V ±1%
FE 5004V	5KVA	100V – 280V	200V - 240V ±1%
FE 5005V	5KVA	150V – 280V	200V - 240V ±1%
FE 5006V (With Cut Out)	5KVA	50V – 265V	200V - 240V ±1%
FE 6002V	6KVA	160V – 270V	200V - 240V ±1%
FE 6003V	6KVA	130V – 270V	200V - 240V ±1%
FE 6004V	6KVA	100V – 280V	200V - 240V ±1%
FE 7003V	7KVA	130V – 280V	200V - 240V ±1%
FE 7004V	7KVA	100V – 280V	200V - 240V ±1%
FE 8003V	8KVA	130V – 280V	200V - 240V ±1%
FE10003V	10KVA	130V – 280V	200V - 240V ±1%
FE10004V	10KVA	100V – 280V	200V - 240V ±1%

FOR AC ONLY

FE 3002A (FOR 1 TON AC)	160V - 270V	200V - 240V ±1%
FE 3003A (FOR 1 TON AC)	130V - 270V	200V - 240V ±1%
FE 3004A (FOR 1 TON AC)	100V - 270V	200V - 240V ±1%
FE 5003A (FOR 1.5 TON AC)	160V - 270V	200V - 240V ±1%
FE 5002A (FOR 1.5 TON AC)	130V - 270V	200V - 240V ±1%
FE 5004A (FOR 1.5 TON AC)	100V - 270V	200V - 240V ±1%
FE 5005A (FOR 1.5 TON AC)	150V - 270V	200V - 240V ±1%
FE 6002A (FOR 2 TON AC)	160V - 270V	200V - 240V ±1%
FE 6003A (FOR 2 TON AC)	130V - 270V	200V - 240V ±1%
FE 6004A (FOR 2 TON AC)	100V - 270V	200V - 240V ±1%

BATTERY CHARGER

Fiji Electronics Pvt. Ltd. manufactures Battery Charger of various capacities with wide range of DC output voltage and charging current. We also undertake manufacture of customer specified Battery Chargers.

CONTROL PANEL

Fiji Electronics Pvt. Ltd. manufactures LT Control Panels as per Customers requirement and specification. We also manufacture Distribution Panels, APFC Panels, MCC Panels, Fire Protection Panel, PLC Panels etc.

CONSTANT VOLTAGE TRANSFORMER (CVT)

Constant Voltage Transformer (CVT) are being manufactured from 100VA to 5KVA for use with sophisticated equipment

Technical Specification

01	Input Voltage	160V-280V
02	Output Voltage	230Volt.
03	Line Frequency	50Hz.
04	Output Frequency	Same as input.
05	Output Regulation	±1% from no load to full load.
06	Temperature Rise	200C above ambient temperature.
07	Protection	Inherent protection for short circuit, over loador over voltage with built in Surge Suppressor, proper heat sinking facility.
08	Correction Speed	Instantaneous(100V/sec).
09	Effect of I/P Frequency change	The output voltage varies @ 2.6% with a frequency change of 1Hz at the input.
10	Insulation	Better than 500M Ohms at 1000V DC.