- Discontinued
Control
Inductive proximity switches Slim type:
PE-T series
- • Unique “Magnetic Shield Method”permits side-by-side mounting
• Only 12mm thick – achieved with IC
• Built-in reverse polarity and surge voltage protection - 12 millimeters thin structure, capable of continuous dense side-by-side mounting.
Supply voltage: 12/24V DC, 120/240V AC
Output capacity: Max. 200mA - IEC 60947-5-2
Feature
Design features
- Unusual “Magnetic Shield Method”permits to mount these units side by side, touching each other.
(Shielded type PE-TS2)
Equipped with 2 mounting holes both side and rear
Capable of appropriate use depending on an installation site
- Only 12mm in thickness because of the use of IC.
- Wide operating voltage range
Operating range of supply voltage is from 80 to 250V AC or from 10 to 30VDC. - LED indicators are provided for all types thus facilitating operation checks.
- Provided with built-in reverse polarity and surge voltage protection circuits.
- Water and oil-tight
Degree of protection meets the requirements of IEC IP67 thus permitting operations in unfavorable environment.
